Type 8752 - Flow Controller (LFC) / Flow Meter (LFM) for Liquids
Type Description
Type 8752 is a device for controlling the flow of liquids in process engineering. The actual value supplied by the sensor is compared with the specified set-point in the digital control electronics. If a control deviation is detected, a PI control algorithm is used to adjust the control signal sent to the proportional valve. This allows the flow rate to be maintained at a fixed value or tracked to a specified profile, regardless of pressure fluctuations or other changes in the system. A low-friction proportional valve, acting as the actuator, ensures high response sensitivity and good control characteristics of the device.
- Highly dynamic control through rapid flow measurement and a fast actuator
- Suitable for regulating flow rates up to 916 ml/min (55 l/h)
- Suitable for use with media with a viscosity of 0.4 to 4 mPa·s
- Control of outgassing media such as H₂O₂ or methanol is possible
- IP65 protection rating
To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.
Can be combined with
Applications & Tools
Downloads
Data Sheets
User Manuals
Software
Declaration of Conformity
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 29 kB | EN,FR,DE |
|
|
EU-DoC|EU Material Compliance | 40.2 kB | EN |
|
|
EU-DoC|EU Material Compliance | 41.7 kB | FR |
|
|
EU-DoC|EU Material Compliance | 40.9 kB | DE |
Certificates/Manufacturer Declarations
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
EtherNet/IP | 12712 | 8752 | 660.1 kB | EN |
|
|
PROFIBUS | Z02373 | 8752 | 97.2 kB | EN |
|
|
PROFINET | Z14276 | 8752 | 244.1 kB | EN |