Type 8745 - Mass flow controller (MFC)/mass flowmeter (MFM) for gases
Type Description
The mass flow controller (MFC)/mass flowmeter (MFM) type 8745 is suitable for controlling the mass flow of large gas quantities. Type 8745 can be configured as MFM or MFC according to demand. Optionally, up to four calibration curves can be stored in the device. The thermal inline sensor located directly in the main gas stream achieves very fast response times with minimal pressure loss. As the actuator, a Bürkert direct-acting proportional valve guarantees high response sensitivity. As an MFC, type 8745 is available in two variants: with electromagnetic proportional valve and with electromechanical proportional valve. In addition to an analogue and an industrial ethernet variant, a Modbus RTU variant is also available.
- Nominal flow range from 20 IN/min to 2500 IN/min (re. nitrogen)
- High accuracy and repeatability
- Communication via standard signals or Industrial Ethernet
- Electromagnetic and electromotoric valve actuation available
- Easy device exchange due to configuration memory
To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.
Can be combined with
Applications & Tools
Downloads
Data Sheets
User Manuals
Software
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
Buerkert Communicator 8.2.4 | 519.7 MB | ML |
|
|
PACTware 6.2.0020 | 320.1 MB | ML |
|
|
Device Description Files B.31 | 27 MB | ML |
|
|
MFC MFM DTM Collection 1.0 | 421.3 kB | ML |
Declaration of Conformity
Certificates/Manufacturer Declarations
Description |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
PROFINET | Z12392 | 8745 | 97.6 kB | EN |
|
|
EtherNet/IP | 11651.02 | 8741 | 156.1 kB | EN |