Share via email
Some fields are missing
send eMail
Speech bubbles
We’re here to help!

 Sales & Tech Support

 E-Mail

 

    Type 8222 - Conductivity meter, ELEMENT design

    Product Image Type 8222

    Specific products may differ slightly from the general images shown.

    Please consider the technical attributes.

    Type Description

    The Bürkert conductivity meter Type 8222 is designed for measuring the conductivity of liquids. The sensor element comprises a two-electrode cell and a Pt1000 temperature probe. The sensor itself is available with three different cell constants C. These are made of stainless steel for sensors with a constant C of 0.01 or 0.1 cm- 1 and of graphite for sensors with a constant C of 1.0 cm- 1. Thus, due to the measuring device’s design, Bürkert has simplified installation and maintenance work. The Type 8222 device is available in two variants. The first one, the so-called ELEMENT standard is proposed either with three adjustable outputs (two digital outputs and one analogue output) or with four adjustable outputs (two digital and two analogue) and can be equipped with a display. The display is only required for start-up, configuration (e.g. measuring range, units, calibration, limit values) or as a process value display. The second variant, the so-called ELEMENT neutrino, is a 2-wire device, without display, with a 4...20 mA current output or with a digital communication mode that can communicate either via IO-Link or in büS (Bürkert system bus based on CANopen). Both variants are available with a G 1½" union nut for installation in an adapter with a G 1½" external thread sensor connection that is connected to the process. The ELEMENT neutrino variant is also available with a G ¾" external thread for screwing into an adapter with a G ¾" internal thread sensor connection. The Type 8222 device converts the measurement signal and calculates the output signals, which are provided via one or two M12 plug connections in the ELEMENT standard variant or via an M12 plug connection in the ELEMENT neutrino variant or on a terminal strip via a cable gland. The device in the ELEMENT standard variant shows different values in different measuring units (if a display is installed).

    • Perfect for clean water and slightly concentrated liquids
    • Compact measuring device for direct connection to the control level (PLC) via analogue 4…20 mA signal or digital IO-Link or Bürkert system bus (büS)/CANopen communication
    • Parametrisation, calibration and transfer of parametrisation data all possible thanks to a removable display/configuration module
    • Simulation of process values for diagnostics
    • Universal process connection, three different cell constants to cover a wide range of applications such as reverse osmosis

    To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.

    Downloads

    Data Sheets

    Description
    Filesize
    Language / Country
    DTS Type 8222 data sheet | conductivity meter [ELEMENT version] 1.9 MB EN / EU
    DTS Type S022 data sheet | fitting for ELEMENT pH/resistive conductivity measurement devices 1.9 MB EN / EU
    DTS Typ 8222 Datenblatt | Leitfähigkeitsmessgerät [ELEMENT-Ausführung] 2 MB DE / DE
    DTS Type 8222 fiche technique | Conductivimètre [conception ELEMENT] 2 MB FR / FR
    DTS Typ S022 Datenblatt | ELEMENT-Fitting für pH- und konduktive Leitfähigkeitsmessgeräte 1.9 MB DE / DE

    User Manuals

    Description
    Filesize
    Language / Country
    MAN Operating Instructions Type 8222 ELEMENT neutrino IO-Link büS | Conductivity meter 2.8 MB EN / EU
    MAN Accessory Type 8026 8036 SE36 8202 8222 8228 ELEMENT | Display module 789.4 kB EN,FR,DE / EU
    MAN Operating Instr. Type S022 | Fitting for 8202+8222 ELEMENT,8202+8222 ELEMENT neutrino 1.5 MB EN / EU
    MAN Operating Instructions Type 8222 ELEMENT neutrino | Conductivity meter 2.3 MB EN / EU
    MAN Operating Instructions Type 8222 ELEMENT | Conductivity meter 1.1 MB EN / EU
    MAN Service manual Type 8222 ELEMENT neutrino | Gasket replacement 172.9 kB EN,FR,DE / EU
    MAN Service manual Type 8202 8222 ELEMENT neutrino | Gasket forthe connecting box 141.9 kB EN,FR,DE / EU
    MAN Bedienungsanleitung Typ 8222 ELEMENT neutrino IO-Link büS |Leitfähigkeits-Messgerät 2.8 MB DE / EU
    MAN Manuel d'utilisation Type 8222 ELEMENT neutrino IO-Link büS| Conductivimètre 2.8 MB FR / EU
    MAN 取扱説明書 タイプ 8222 ELEMENT | 導電率計 3.7 MB JA / JP
    MAN 사용 설명서 타입 8222 ELEMENT | 전도계 3.3 MB KO / KR
    MAN 타입 S022 | 사용 설명서 |측정기용 삽입 어댑터 또는 피팅 1.2 MB KO / KR
    MAN Bedienungsanleitung Typ 8222 ELEMENT neutrino | Leitfähigkeitsmessgerät 2.4 MB DE / EU
    MAN Bedienungsanleitung Typ 8222 ELEMENT | Leitfähigkeitsmessgerät 1.2 MB DE / EU
    MAN Bedienungsanleitung Typ S022 | Fitting für 8202+8222 ELEMENT, 8202+8222 ELEMENT neutrino 1.5 MB DE / EU
    MAN Manual de instrucciones Modelo 8222 ELEMENT | Módulo de pantalla 535.4 kB ES / ES
    MAN Manuel d'util. Type S022 | raccord pour 8202+8222 ELEMENT,8202+8222 ELEMENT neutrino 1.5 MB FR / EU
    MAN Manuel d'utilisation Type 8222 ELEMENT | Conductivimètre 1.1 MB FR / EU
    MAN Manuel d'utilisation type 8222 ELEMENT neutrino | Conductivimètre 2.3 MB FR / EU

    Declaration of Conformity

    Description
    Filesize
    Language / Country
    ABD EU-DoC|EU Declaration 28.6 kB EN,FR,DE
    ABD MDec|Food 8222-xxxx-PD00-C2/C1 231.6 kB EN,FR
    ABD EU-DoC|EU Material Compliance 40.2 kB EN
    ABD EU-DoC|EU Material Compliance 41.7 kB FR
    ABD EU-DoC|EU Material Compliance 40.9 kB DE

    Certificates/Manufacturer Declarations

    Description
    Filesize
    Language / Country
    ABD IO-Link | ClassA Rev.1 | 8222 211.2 kB EN

    Flyers and Catalogues

    Description
    Filesize
    Language / Country
    MISC Analytical Meters 4.6 MB EN / EU
    MISC Continuous individual pressure pipe monitoring of diaphragm defects in nanofiltration and reverse osmosis systems 1.7 MB EN / EU
    MISC Monitoring of Reverse Osmosis Systems 1.7 MB EN / EU