Any questions?

We’re here to help!

Please give us a call:
+1-800-325-1405

Bürkert - Close to you
Office /2
    • Main Office
      Burkert Contromatic Corp. US Headquarters
      11425 Mt. Holly-Huntersville Road
      Huntersville, NC 28078
      Phone +1 800 325 1405
      Fax +1 949 223 3198
      E-Mail znexrgvat-hfn@ohexreg.pbz
    • Office
      Sales Office - West Coast Burkert Contromatic Corp.
      2572 White Road
      Irvine, CA 92614
      Phone +1 800 325 1405
      Fax +1 949 223 3198
      E-Mail znexrgvat-hfn@ohexreg.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

    Type 8200 - Armatures for analytical probes

    Produkt-Foto Typ 8200

    Specific products may differ slightly from the general images shown.

    • Produkt-Foto Typ 8200
    • Produkt-Foto Typ 8200
    • Ersatzteil-Zeichnung Bürkert
    • Ersatzteil-Zeichnung Bürkert
    • Ersatzteil-Zeichnung Bürkert

    Type Description

    The holder range for 120 mm analytical probes (pH/ORP/conductivity...) covers many types of applications: - General purpose - Water treatment - Food & Beverage - Pharmaceutical/Biotechnology. A wide range of process connections are available for: General purpose holders mounted on pipes or tanks Hygienic holders designed for hygienic applications: - 3-rod holders which ensure good sensor protection and allow easy cleaning. Due to a sanitary design steam sterilisation, autoclavation, CIP are possible. - The direct welding holders save space and are designed for installation in fermenters and many other applications with tanks and pipes. Steam sterilisation, autoclavation, CIP are possible. - Special holders for the 2” Clamp connection or for DN50 thread process connections satisfy highest demands, for example, in CIP-applications A Pt1000 temperature probe is available as an option. - The 15° version with 2" (DN50/40) connection adapted for GEA Tuchenhagen VARINLINE process connections enables positioning of the probe in relation to the flow or in vertical pipes. A special holder, the analytical measurement chamber Type 8200, is designed to be used with the chlorine sensor Type 8232.

    • For many different types of installations and applications
    • Large range of probe holders
    • General purpose, water treatment, food & beverage, pharmaceutical applications

    To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.

    Downloads

    Data Sheets

    Description
    Filesize
    Language / Country
    DTS Chlorine Sensor 1.7 MB EN / EU
    DTS Fitting for insertion Sensor 402.9 kB EN / EU
    DTS pH or ORP probe 1.7 MB EN / EU
    DTS pH/ORP- Probe holder 1.9 MB EN / EU
    DTS Capteur de chlore 1.7 MB FR / FR
    DTS Chlor-Sensor 1.7 MB DE / DE
    DTS Fitting de insercion 887.4 kB ES / ES
    DTS Fitting für Insertion-Sensor 400.7 kB DE / DE
    DTS Raccord à insertion 400.2 kB FR / FR
    DTS Sonde de pH ou potentiel Redox 1.7 MB FR / FR
    DTS Supports de sonde pH/redox 1.9 MB FR / FR
    DTS pH o. ORP Sonden 1.7 MB DE / DE
    DTS pH/ORP- Sondenhalter 1.9 MB DE / DE

    User Manuals

    Description
    Filesize
    Language / Country
    MAN Câble Variopin 8205-8200 109.7 kB EN,FR,DE / EU
    MAN Direct Welding Holder 678.9 kB EN,FR,DE / EU
    MAN Hygienic holder 392.7 kB EN,FR,DE / EU
    MAN Operating Instructions 295.7 kB EN / EU
    MAN Bedienungsanleitung 295 kB DE / EU
    MAN Manuel d'utilisation 295.8 kB FR / EU

    Interactive Animation

    Description
    Filesize
    Language / Country
    3D_ANIMATION 3D-Animationen 1.6 MB DE
    3D_ANIMATION 3D-Animationen 1.6 MB EN