Bürkert - Close to you
Office /2
    • Main Office
      Burkert Contromatic Corp. US Headquarters
      11425 Mt. Holly-Huntersville Road
      Huntersville, NC 28078
      Phone +1-800-325-1405
      Fax +1-949-223-3198
      E-Mail znexrgvat-hfn@ohexreg.pbz
    • Main Office
      Sales Office - West Coast Burkert Contromatic Corp.
      2572 White Road
      Irvine, CA 92614
      Phone +1-800-325-1405
      Fax +1-949-223-3198
      E-Mail znexrgvat-hfn@ohexreg.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
We make ideas flow.
We make ideas flow.

    Type 8076 - Positive Displacement flowmeter with display, ELEMENT design

    Produkt-Foto Typ 8076

    Specific products may differ slightly from the general images shown.

    • Produkt-Foto Typ 8076
    • Produkt-Foto Typ 8076

    Type Description

    This positive displacement flow transmitter with display Type 8076 is designed for use in slightly viscous fluid like glue, honey. The transmitter is made up of a compact fitting (S070) and an enclosure with cover, containing the electronic module. A removable display completes the transmitter. This ensemble (SE36) is quickly and easily connected to the fitting (S070) by a Quarter-Turn. The flow transmitter can operate without the display, but it will be required for programming the transmitter (i.e. set parameters, restore default parameters, programme information to be displayed, programme access code, adjust 4-20 mA output(s)...) and also for visualizing continuously the measured and processed data. The device Type 8076 is available with: - 2 programmable outputs: one transistor output (NPN) and one 4-20 mA current output (2-wire) - 3 programmable outputs: two transistor outputs (NPN/PNP) and one 4-20 mA current output (2-wire) - 4 programmable outputs: two transistor outputs (NPN/PNP) and two 4-20 mA current outputs (3-wire) The device Type 8076 converts the measured signal, displays different values in different units (if display mounted) and computes the output signals,which are provided via one or two M12 fixed connectors.Thanks to 1 or 2 transistor outputs, the transmitter can be used to switch a solenoid valve,activate an alarm and, thanks to 1 or 2 current outputs,establish one or two control loops.

    • Programmable outputs : one or two transistor output(s) and single or dual 4-20 mA current output(s)
    • Removable backlit display of flow rate and/or 2 two totalized volumes
    • Automatic-calibration: TEACH-IN, simulation of outputs signals provided without the need for real flow

    To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.


    Language / Country
    3D_ANIMATION 3D-Animation - 8076 3D-PDF-DE-SD-ORD4_pdf.pdf 2.8 MB DE
    3D_ANIMATION 3D-Animation - 8076 3D-PDF-EN-SD-ORD4_pdf.pdf 2.8 MB EN
    DTS Ovalrad-Transmitter DS8076-Standard-DE-DE.pdf 431 kB DE / DE
    DTS Ovalgear Transmitter DS8076-Standard-EU-EN.pdf 423.3 kB EN / EU
    DTS Transmetteur Débit roues ovale DS8076-standard-FR-FR.pdf 429.9 kB FR / FR
    DTS Durchfluss-Fitting 807X-SE30EX DSS070-Standard-DE-DE.pdf 675.8 kB DE / DE
    DTS Flow Fitting for 807X-SE30EX DSS070-Standard-EU-EN.pdf 237.8 kB EN / EU
    DTS Raccord de débit roues ovales DSS070-Standard-FR-FR.pdf 650 kB FR / FR
    MAN Fitting-sensor w. oval gears MAS070-FittngSensor-EU-ML.pdf 285.6 kB EN,FR,DE / EU