Type 8041 - Electromagnetic Insertion flowmeter

Type Description

The electromagnetic flowmeter Type 8041 consists of an electronic module and a sensor made from PVDF or stainless steel. It is suitable for pipelines with nominal diameter of DN 06…DN 400 and neutral or aggressive liquids with conductivity greater than 20 μS/cm. Type 8041 is fitted with a 4…20 mA current output, a frequency output and a relay output. The device is configured using 5 DIP switches, a push button, and a 10-segment LED bar graph. This flowmeter is available with either a G 2" connection for a PVDF sensor or a G 2" or clamp connection for a stainless steel sensor, both of which are designed for use with a Type S020 Insertion fitting. The variant with stainless steel sensor is for applications with higher pressures (PN 16) and higher temperatures (150 °C).

Sensor without moving parts
Flowmeter with 2-point control function
Application-specific calibration via teach-in functionality
Clean in place (CIP) compatible
FDA-compliant materials

To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.

Can be combined with

Type 8025

Insertion flowmeter or batch controller with...

Type 8802

ELEMENT continuous control valve systems –...

Type 8619

multiCELL – multi-channel/multi-function...

Type 8644

AirLINE SP electropneumatic automation system

Show full table Collapse table

Applications & Tools

Downloads

Data Sheets

Description	Filesize	Language / Country
Data sheet Type 8041 \| Magnetic-inductive Insertion flow meter	1.6 MB	EN / EU
Data sheet Type S020 \| Insertion fitting for flow or analytical measurement	2.4 MB	EN / EU
Datenblatt Typ 8041 \| Magnetisch-induktives Insertion-Durchflussmessgerät	1.6 MB	DE / DE
Fiche technique Type 8041 \| Débitmètre Insertion électromagnétique	1.6 MB	FR / FR
Datenblatt Typ S020 \| Insertion-Fitting für Durchfluss-/Analysemessungen	2.4 MB	DE / DE
Fiche technique Type S020 \| Raccord Insertion pour les mesures de débit ou d'analyse	2.3 MB	FR / FR

User Manuals

Description	Filesize	Language / Country
Mounting Instructions SET8 \| Replacing the finger gasket	83.5 kB	EN / EU
Operating Instructions Type S020 \| Insertion fitting	1.3 MB	EN / EU
Operating Instructions \| Type8041 \| Electromagnetic Insertion flowmeter	3.5 MB	EN / GB
取扱説明書タイプ 8041 \| インサーション型電磁式流量計	3 MB	JA / JP
取扱説明書タイプ S020 \| ねじ接続の挿入	1.5 MB	JA / JP
타입 S020 \| 사용 설명서 \| 삽입형 피팅	1.4 MB	KO / KR
Bedienungsanleitung Typ S020 \| Insertion Fitting	1.4 MB	DE / DE
Bedienungsanleitung \| Typ 8041 \| Elektromagnetischer Insertion-Durchflussmesser	3.6 MB	DE / DE
Driftsinstruktion Typ 8041 \| Insats elektromagnetisk flödesmätare	2.7 MB	SV / SE
Driftsinstruktion Typ S020 \|Insertionsskruvförband	1.9 MB	SV / SE
Instructions de montage SET 8\| Remplacement du joint du doigt	83.8 kB	FR / FR
Manuel d'utilisation Type S020 \| Raccord Insertion	1.4 MB	FR / FR
Manuel d'utilisation \| Type 8041 \| Débitmètre à Insertion électromagnétique	3.6 MB	FR / FR
Montagehinweise SET8 \| Wechseln des Finger-O-Rings	83.8 kB	DE / DE