Bürkert - Close to you
Office /2
    • Main Office
      Burkert Contromatic Corp. US Headquarters
      11425 Mt. Holly-Huntersville Road
      Huntersville, NC 28078
      Phone +1-800-325-1405
      Fax +1-949-223-3198
      E-Mail znexrgvat-hfn@ohexreg.pbz
    • Office
      Sales Office - West Coast Burkert Contromatic Corp.
      2572 White Road
      Irvine, CA 92614
      Phone +1-800-325-1405
      Fax +1-949-223-3198
      E-Mail znexrgvat-hfn@ohexreg.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

    Type 8026 - Insertion Paddle Wheel Flowmeter, ELEMENT design

    Produkt-Foto Typ 8026

    Specific products may differ slightly from the general images shown.

    • Produkt-Foto Typ 8026
    • Produkt-Foto Typ
    • Produkt-Foto Typ

    Type Description

    The Bürkert transmitter Type 8026 is a compact device, specially designed for measuring the flow rate in solid-free liquids, in a variety of applications (water, waste water monitoring, chemical processing...). The transmitter is equipped of a sensor with paddle-wheel, available in long or short version (depend on DN of used fitting). This sensor holder is plugged-in and pined to an enclosure with cover, containing the electronic module. A removable display completes this transmitter. The flow transmitter can operate without the display, but it will be required for programming the transmitter (i.e. set parameters, restore default parameters, programme information to be displayed, programme access codes, adjust 4-20 mA output(s) ...) and also for visualizing continuously the measured and processed data. The device Type 8026 is available with: - 2 programmable outputs : one transistor output (NPN) and one 4-20 mA current output (2-wire) - 3 programmable outputs: two transistor outputs (NPN/PNP) and one 4-20 mA current output (2-wire) - 4 programmable outputs: two transistor outputs (NPN/PNP) and two 4-20 mA current outputs (3-wire) The device Type 8026 converts the measured signal, displays different values in different units (if display mounted) and computes the output signals, which are provided via one or two M12 fixed connectors. Thanks to 1 or 2 transistor outputs, the transmitter can be used to switch a solenoid valve, activate an alarm and, thanks to 1 or 2 current outputs, establish one or two control loops.

    • PN10, DN15 to DN400 fluidic process connection
    • Programmable outputs : one or two transistor output(s) and single or dual 4-20 mA analog output(s)
    • Removable backlit display of flow and/or two totalized volumes
    • Automatic-calibration: TEACH-IN, simulation of outputs signals provided without the need for real flow

    To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.

    Downloads

    Description
    Filename
    Filesize
    Language / Country
    ABD EU-DoC|EU Declaration 1000292040-0_8026_EU-DoC signed.pdf 469.2 kB ML
    DTS Transmetteur ELEMENT de débit DS8026-Standard-FR-FR.pdf 648.9 kB FR / FR
    DTS Durchfluss-Transmitter ELEMENT DS8026-Transmitter-DE-DE.pdf 645.2 kB DE / DE
    DTS Transmisor Caudal ELEMENT ins DS8026-Transmitter-ES-ES.pdf 2.4 MB ES / ES
    DTS Flow-Transmitter ELEMENT DS8026-Transmitter-EU-EN.pdf 729.7 kB EN / EU
    DTS Fitting für Insertion-Sensor DSS020-Standard-DE-DE.pdf 400.7 kB DE / DE
    DTS Fitting for insertion Sensor DSS020-Standard-EU-EN.pdf 402.9 kB EN / EU
    DTS Raccord à insertion DSS020-Standard-FR-FR.pdf 400.2 kB FR / FR
    MAN Bedienungsanlei 8026-8036-SE36 MA8026-Manual-EU-DE.pdf 5.2 MB DE / EU
    MAN Op Instructions 8026-8036-SE36 MA8026-Manual-EU-EN.pdf 5.2 MB EN / EU
    MAN Man. utilisat° 8026-8036-SE36 MA8026-Manual-EU-FR.pdf 5.2 MB FR / EU
    MAN Quickstart 8026-8036-SE36 MA8026-Quickstart-EU-ML.pdf 6 MB EN,FR,DE / EU
    MAN Operating Instruction Display MA8222-Manual-EU-ML.pdf 808.8 kB EN,FR,DE / EU
    MAN Fitting for insertion devices MAS020-Fitting-EU-ML.pdf 1.5 MB EN,FR,DE / EU

    Available products

  • Filter
    • PN10, DN15 to DN400 fluidic process connection
    • Programmable outputs : one or two transistor output(s) and single or dual 4-20 mA analog output(s)
    • Removable backlit display of flow and/or two totalized volumes
    • Automatic-calibration: TEACH-IN, simulation of outputs signals provided without the need for real flow