You are using an outdated browser. Unfortunately, this does not allow us to guarantee that our website can be used without any errors. The use of outdated browsers often leads to low speed and security problems, too. We recommend that you install a new version or an alternative browser to get the full functionality of our website.
Type 6211
- Diaphragm valve 2/2-way servo-assisted
Specific products may differ slightly from the general images shown.
Please consider the technical attributes.
Type Description
The Type 6211 is a servo-assisted normally closed 2/2-way solenoid valve with a servo diaphragm for use especially with neutral fluids and gaseous media. The range of housing includes brass, stainless steel and plastic. The valve has a low power consumption, low weight and a compact body. The valve is normally closed by spring force. Energized, the solenoid opens the pilot valve first. Then the medium pressure opens the main valve due to the pressure drop above the diaphragm. The valve opens. The special design and geometry of the inner parts of the valve result in a soft closing function and cause almost no water hammer.
Servo-assisted diaphragm valve with a diameter up to DN 20
Body material in brass, stainless steel and plastic
Explosion-proof variants
Damped design for low noise
To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.