Any questions?

We’re here to help!

Please give us a call:

Bürkert - Close to you
Office /2
    • Main Office
      Burkert Contromatic Corp. US Headquarters
      11425 Mt. Holly-Huntersville Road
      Huntersville, NC 28078
      Phone +1-800-325-1405
      Fax +1-949-223-3198
      E-Mail znexrgvat-hfn@ohexreg.pbz
    • Office
      Sales Office - West Coast Burkert Contromatic Corp.
      2572 White Road
      Irvine, CA 92614
      Phone +1-800-325-1405
      Fax +1-949-223-3198
      E-Mail znexrgvat-hfn@ohexreg.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
We make ideas flow.
We make ideas flow.

    Type 1150 - Multi-channel process and program controller

    Produkt-Foto Typ 1150

    Specific products may differ slightly from the general images shown.

    • Produkt-Foto Typ 1150
    • Produkt-Foto Typ 1150
    • Produkt-Foto Typ 1150

    Type Description

    The Type 1150 is a process and program controller with up to 4 controller or program channels. The instrument is built to the format 144 mm x 130 mm for a standard 92 mm x 92 mm panel cut-out and a mounting depth of 170 mm. The display is a 5” color graphics display (27 colours). The layout of the screen templates can be individually adapted and adjusted. Two freely confi gurable screen templates make it possible to customize the placing of texts, process values, background pictures and icons. A maximum of 4 analog inputs and 6 logic inputs are available, as well as six expansion slots for switched or analog outputs. A setup program is available for comfortable configuration from a PC. Linearizations for the usual transducers are stored within the instrument, four customerspecific linearization tables can be programmed. A math and logic module can be used to adapt the instrument to a very wide range of control tasks. Two serial interfaces, RS422/485 or Profi bus-DP, can be used to integrate the instrument into a data network. Modules can be retrofi tted quite simply by the user (see block structure). The electrical connection is made at the rear of the instrument, via plug-in screw terminals.

    • Brilliant 5” colour graphics display, with 27 colours
    • Freely configurable screen templates
    • Up to 4 controller channels
    • 50 programmes, with 1,000 segments under dynamic management

    To help select the correct product please refer to the technical data, images and notes for proper use found in the data sheet.


    Language / Country
    DTS Regler DS1150-Standard-DE-DE.pdf 387.9 kB DE / DE
    DTS Controller DS1150-Standard-EU-EN.pdf 354.5 kB EN / EU
    MAN Bedienungsanleitung MA1150-Standard-DE-DE.pdf 1.3 MB DE / DE
    MAN Operating Instructions MA1150-Standard-EU-EN.pdf 1.7 MB EN / EU