Cookies must be enabled to use this function. Please accept cookie privacy policy first.
Pressure
Type 8311
- Indication, monitoring, transmitting and continuous or On/Off control in one device
- Output signal 4...20 mA, 2-wire for continuous control
- Transistor or relay outputs for On/Off control or alarm function
Type 8312
- Ceramic thick film or metallic thin film strain gauge measuring principles
- Process connections: G, NPT in ¼" or G ¾" (with hygienic flush diaphragm)
- Linearised and temperature compensated measuring ranges from 0…0.25 bar up to 0…16 bar can be selected, relative pressure
- Media temperature range depends on the measuring principle: - 20…+ 85 °C (ceramic), - 40…+ 125 °C (metallic)
- Access to measured value, device status and settings via the CANopen interface
Type 8316
- Ceramic/thick film measuring cell
- 2-wire version for 4...20 mA output
- Compact, stable construction for the highest operational reliability
Type 8318
- Metallic thin film strain gauge measuring principles
- Process connections: G, NPT in ¼", G ¾" with hygienic flush diaphragm or clamp according to DIN 32676
- Measuring ranges for relative pressure from - 0.4…+ 0.4 bar up to - 1…+ 12.0 bar
- Available switching functions: PNP or NPN
- Access to measured value, device status and settings via IO-Link interface, very easy sensor replacement
Type 8323
- Piezoresistive or thin film sensor element
- Available with hygienic flush diaphragm
- Housing and wetted parts in corrosion-resistant stainless steel
- Standard signal 4...20 mA for connection to automation systems
- Plug for fast installation and service
Type 8325
- Available with hygienic flush-mounted diaphragm
- Housing and wetted parts in corrosion-resistant stainless steel
- Standard signal 4…20 mA for connection to automation systems
- Plug for quick installation and service
- Many pressure ranges available
Type 8763
- Repeatable and accurate dosing of liquids in the µl range
- Response time in milliseconds and active pressure relief for optimum control performance
- Digital communication for easy integration into your fieldbus network
- Extended functionality through additional sensor input + actuator output e.g. for pump or additional pressure sensor
- Active vent valve to minimize consumption of costly carrier gas
Type TAU001
- For gases and not crystallizing liquids
- Back or radial mount lower connection
- Different sizes and measurement ranges
Type TCD001
- For neutral gases and liquids
- Models normally open contact, normally closed contact or changeover contact
- Switching point can be adjusted with grub screw
Type TSD001
- Ceramic measurement cell
- 2-wire version
- Wetted part material 1.4305, ceramics, FKM
Bürkert
/8311.png)
/8312.png)
/8316.png)
/8318.png)
/8323.png)
/8325.png)
/8763.png)
/TAU001.png)
/TCD001.png)
/TSD001.png)