Solenoid valves for water and steam applications
When it comes to providing reliable, high performance two-way solenoid valves for water and steam applications, Bürkert has a premium solution for you. Our complete range of servo-assisted two-way solenoid valves offer the ultimate flow control.
What is a two-way valve?
A two-way solenoid valve is any type of solenoid actuated valve with two ports: an inlet and an outlet port. Popular across a wide variety of applications, two-way valve operation ranges from basic on/off to variable flow applications involving pumps and variable-frequency drives. Correct valve selection depends largely on the degree of control, amount of flow, shut-off and pressure drops involved – considerations that Bürkert’s technical advisers will be only too happy to discuss with you to ensure the perfect solenoid valve solution.
Two-way solenoid valve for water – Type 6281
The Type 6281 valve is a servo-assisted two-way solenoid valve from the S.EV series. Requiring a minimum pressure differential for the proper function of the valve, this solenoid valve for water applications is available with various diaphragm material combinations and methods of operation, depending on the application. The standard brass housing satisfies all European drinking water requirements, while dezincification-resistant brass and stainless steel versions are also available.
The solenoid coils of the Type 6281 are moulded with a chemically resistant epoxy and can be delivered with electronic power reduction for reduced energy requirements. This two-way water valve can be equipped with manual override for easy maintenance and commissioning. Plus, when combined with a plug (in accordance with DIN EN 17301-803 Form A) satisfy protection class IP65 – in combination with a stainless steel housing NEMA 4X.
Features and benefits of the Type 6281
- Servo-assisted diaphragm with diameter of up to DN 50.
- Vibration-proof, central screwed coil system.
- Damped design for quiet closing.
- Molded housing with high surface quality.
- Service-friendly manual override.
Two-way solenoid valve for steam – Type 5404
The Type 5404 valve is a servo-assisted piston valve available in both NC and NO versions. This two-way solenoid valve for steam comes in a standard brass housing that satisfies all European drinking water requirements. The solenoid coils are molded with high-quality polyamide and, for reduced energy requirements, all coils can be delivered with electronic power reduction. These solenoid valves for steam applications also satisfy protection class IP65 when combined with a plug.
Features and benefits of the Type 5404
- Servo-assisted piston valve with diameter of up to DN 25.
- Vibration-proof, screwed coil system.
- Molded housing with high surface quality.
- Explosion proof versions.
- Suitable for gas and steam applications.
Servo-assisted 2/2-way diaphragm valve
- Servo-assisted diaphragm valve up to DN 50
- Vibration-resistant, centrally screwed coil system
- Damped design for quiet closing
- Energy-saving double coil technology with kick and drop variant
- Explosion-proof variants
Servo-assisted 2/2-way piston valve
- Servo-assisted piston valve with an orifice up to DN50
- Explosion proof versions for Cat. 2
- Suitable for gas and steam applications up to 180°C
- Relief valves for compressors
- Energy-saving double coil technology with kick and drop variant
If you have any questions or would like to request more information, please call us on +1 800 325-1405, email sales.us@burkert.com or fill in the form below.