Process Automation Solutions with Rockwell AOP/AOI

Webinar On-Demand now available! Details here

When leading technology providers work together, the possibilities are endless. As a Rockwell Encompass Partner for over a decade, Burkert Fluid Controls has made it easier for plants to automate their process applications using Rockwell PLC, but now as the need for Industry 4.0 ready devices matters more than ever before, we are making it easier than ever to pair devices with control panel solutions.

The Burkert devices below are Rockwell Add-On Profile (AOP) ready:

AirLINE - the valve island optimised for process automation

Type 8652

• Safety-related shut-off of valves possible
• Easy diagnostics via LC display
• Process reliability through pneumatic functions
• Optimised for installation at the bottom of the control cabinet
• Explosion-proof variants according to ATEX / IECEx Zone 2

Digital electro-pneumatic positioner for integrated mounting on process control valves

Type 8692

• Compact and robust stainless steel design
• Easy start-up with automatic X-Tune function
• Contact-free position sensor
• Integrated pilot air duct with spring chamber aeration
• EtherNet/IP, PROFINET, Modbus TCP, PROFIBUS DP-V1 or Bürkert system bus (büS)

Digital electro-pneumatic process controller for integrated mounting on process control valves

Type 8693

• Compact and robust stainless steel design
• Easy start-up via Tune function for position and process controller
• Contact-free position sensor
• Integrated pilot air duct with spring chamber aeration
• PROFIBUS DP-V1, EtherNet/IP, PROFINET, Modbus TCP or büS (Bürkert System Bus)

FLOWave SAW flowmeter

Type 8098

• No obstacles inside the measuring tube, compact, lightweight and low energy consumption
• Conforms to hygienic requirements, CIP/SIP compatible
• Ideal for liquids with low or no conductivity
• Digital communication, parameterisation via Communicator, display and Wi-Fi
• Optional: ATEX certification, II 3G/D

FLOWave SAW flowmeter

Type 8098

• No obstacles inside the measuring tube, compact, lightweight and low energy consumption
• Conforms to hygienic requirements, CIP/SIP compatible
• Ideal for liquids with low or no conductivity
• Digital communication, parameterisation via Communicator, display and Wi-Fi
• Optional: ATEX certification, II 3G/D

(*Type 8098 AOP Files coming December 2021 along with new product firmware update)

And these devices are Add-On Instructions (AOI) ready:

AirLINE Field - the valve island optimised for process automation

Type 8653

• Fieldbus interface CANopen, IO-Link or büS (Bürkert System Bus)
• Easy diagnostics via LC display
• Process reliability through pneumatic functions
• Optimised for installation in the field (IP65/67)

Control head for decentralized automation of hygienic process valves

Type 8681

• Universal attachment for hygienic process valves
• Contactless position measurement system with 3 switching points (Teach-In function)
• Coloured status display
• Manual override operative with closed housing
• AS-Interface, IO-Link, büS/CANopen

Control head for decentralised automation of ELEMENT process valves

Type 8691

• Contact-free inductive valve position registration (Teach function)
• Colour illuminated status display
• Integrated pilot air duct in the actuator
• Fieldbus interface AS-Interface, IO-Link or Bürkert system bus (büS)
• With ATEX II cat. 3G/D / IECEx approval

Control head for decentralised automation of ELEMENT process valves

Type 8695

• Contact-free inductive valve position registration (Teach function)
• Colour illuminated status display
• Integrated pilot air duct in the actuator
• AS-Interface, IO-Link, Bürkert system bus (büS)
• With ATEX II cat. 3G/D approval

Digital electropneumatic positioner for the integrated mounting on process control valves

Type 8694

• Compact, robust stainless steel design
• Start-up by automatic TUNE-function
• Contact-free position sensor
• Integrated control air routing
• AS-Interface, IO-Link or Bürkert System bus (büS)

Digital electropneumatic positioner for the integrated mounting on process control valves

Type 8696

• Compact, robust stainless steel design
• Start-up by automatic TUNE-Function
• Contact-free position sensor
• Integrated control air routing
• Digital communication IO-Link, Bürkert system bus (büS)

However Electronic Data Sheet (EDS) are also available on a wide range of other devices including:

AirLINE - the valve island optimised for process automation

Type 8652

• Safety-related shut-off of valves possible
• Easy diagnostics via LC display
• Process reliability through pneumatic functions
• Optimised for installation at the bottom of the control cabinet
• Explosion-proof variants according to ATEX / IECEx Zone 2

Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for Gases

Type 8741

• Nominal flow ranges from 0.010 l/min to 160 l/min
• High accuracy and repeatability
• Very fast response times
• Easy device exchange through configuration memory
• Optional: USP Class VI, FDA, EG 1935 conformity

Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for gases

Type 8742

• Nominal flow ranges from 0.010 l/min to 160 l/min
• Highest measuring accuracy and repeatability with very fast response times
• Long-term stability of the flow calibration
• Easy device exchange due to configuration memory
• Optional: ATEX II Cat. 3G/D or USP Class VI, FDA, EG 1935 conformity

Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for gases

Type 8745

• Nominal flow ranges from 20 l/min up to 2500 l/min
• High accuracy and repeatability
• Communication via standard signals or Industrial Ethernet
• Electromagnetic and motor-driven valve actuation available
• Easy device exchange through configuration memory

Mass flow controller (MFC)/ Mass flow meter (MFM) for liquids

Type 8756

• Flow measurement / control up to 25 kg/h
• Very high accuracy and measuring range
• High long-term stability, no zero-point adjustment necessary
• Hochbeständige mediumsberührte Materialien
• Suitable for numerous liquids

multiCELL - Multi-channel and multi-function transmitter/controller

Type 8619

• Compatible with most common flow, pH/ORP, chlorine and conductivity sensors
• Simple, intuitive user interface with a large adjustable backlit graphics display (4 user defined views)
• Hardware extension possibilities (up to 6 free slots)
• Industrial Ethernet (Modbus TCP, PROFINET or EtherNet/IP) option available
• Functionality extendable by software options

Fieldbus gateway

Type ME43

• Gateway for industrial Ethernet and fieldbus standards
• Up to 128 input and 128 output variables can be assigned
• Easy integration in the process control level through system-specific device description files
• Graphical programming for automation of sub-systems

FLOWave SAW flowmeter

Type 8098

• No obstacles inside the measuring tube, compact, lightweight and low energy consumption
• Conforms to hygienic requirements, CIP/SIP compatible
• Ideal for liquids with low or no conductivity
• Digital communication, parameterisation via Communicator, display and Wi-Fi
• Optional: ATEX certification, II 3G/D

Email us for more info & even feel free to check out our Distributed Automation Webinar On-Demand for more details.