Share via email
Some fields are missing
send eMail

Bürkert presents a flexible alternative to solenoid valves

With a new series of electrically controlled motor valves Bürkert expands the spectrum of components for fluid control. The new valves are designed for space-saving and energy-saving operation. They also achieve a very fine linear characteristic and low hysteresis in the control of fluid flows.

The new compact valves from Bürkert use two different drive and valve concepts, depending on the orifice size: the first is based on linear drive seat valves for orifices DN2 to DN6 (Type 3270: shut-off valve, Type 3280: proportional valve). For the larger orifices DN8 to DN25 the fluid technology specialists from Ingelfingen rely on rotary drive disc valves. They are likewise available as shut-off valves (Type 3275) and as proportional valves (Type 3285). In the seat valves, the direction of flow against the seat is from below. They feature high leak tightness and short closure times. In the disc valves the direction of flow against the seat is from above. They are impressive due to their pressure insensitivity. In the development of the new motor valves Bürkert focused especially on a compact design, even in the case of larger orifices. All sizes of the Types 3270 and 3280 are housed in a standard body with dimensions of 137 mm x 55 mm x 64 mm (HxWxD). For Types 3275 and 3285 there are three compact sizes due to the larger spectrum of orifices. The valve bodies are available in brass or stainless steel.

My Comparison List